EDM - Wire CUT - High speed machining - CUT 200 Sp

Swiss design and manufacturing - The foundation of performance. Faster data processing, safety in operation, self testing, reliability and energy savings are the main characteristics of the new electronic architecture of the CUT mS / Sp series.
8 ピン14 フォロワー
Positioning accuracy - The reference holes machined under these conditions of stable temperature can achieve a positional accuracy of ± 3 μm.

Positioning accuracy - The reference holes machined under these conditions of stable temperature can achieve a positional accuracy of ± 3 μm.

One of the machine's accomplishments - Stamping die

One of the machine's accomplishments - Stamping die

Applications - Performance and versatility to meet all expectations.

Applications - Performance and versatility to meet all expectations.

Super alloys - Studies on titanium or nickel alloys have shown that the layer affected by machining with the CC digital generator is very small. This affected surface layer becomes almost invisible after four finishing cuts, and so the mechanical characteristics of the machined part remain completely unchanged. The process is ideal for applications with strict safety requirements, such as aeronautics and the #medical #industry.

Super alloys - Studies on titanium or nickel alloys have shown that the layer affected by machining with the CC digital generator is very small. This affected surface layer becomes almost invisible after four finishing cuts, and so the mechanical characteristics of the machined part remain completely unchanged. The process is ideal for applications with strict safety requirements, such as aeronautics and the #medical #industry.

Optical communication lines improve accuracy - To achieve high accuracy and finest surface finish, the optical communication lines from the numerical control ensure ultra fast reaction time of the digital servo drive and accurately control the nanosecond sparking pulses.

Optical communication lines improve accuracy - To achieve high accuracy and finest surface finish, the optical communication lines from the numerical control ensure ultra fast reaction time of the digital servo drive and accurately control the nanosecond sparking pulses.

Carbide - #Machining do not cause any #electrochemical reactions which could make the sensitive cobalt binding material dissolve. The quality of the cut edges and the service life of the tools are optimized. The CC generator allows a surface finish of Ra 0.1 μm to be attained.

Carbide - #Machining do not cause any #electrochemical reactions which could make the sensitive cobalt binding material dissolve. The quality of the cut edges and the service life of the tools are optimized. The CC generator allows a surface finish of Ra 0.1 μm to be attained.

Safety in use - The dual check safety system is composed of two central processing units working in parallel to process data faster, and cross check information fed back from the motors, the digital servo drive and from all the safety devices of the machine. This multi-point monitoring ensures safer machine operation in accordance with the most demanding standards EN 954-1 and IEC 62061.

Safety in use - The dual check safety system is composed of two central processing units working in parallel to process data faster, and cross check information fed back from the motors, the digital servo drive and from all the safety devices of the machine. This multi-point monitoring ensures safer machine operation in accordance with the most demanding standards EN 954-1 and IEC 62061.

A maximum speed of over 400 mm2 per minute. Wire-cutting #EDM is sometimes a good alternative to conventional #machining. To obtain high machining speed, the use of large stratified #wire diameters is essential as well as more power from the #EDM generator. The CUT mS / Sp series has both. The CUT mS / Sp series allows the threading of large stratified wires that are essential for obtaining high machining speeds and the resulting high productivity.

A maximum speed of over 400 mm2 per minute. Wire-cutting #EDM is sometimes a good alternative to conventional #machining. To obtain high machining speed, the use of large stratified #wire diameters is essential as well as more power from the #EDM generator. The CUT mS / Sp series has both. The CUT mS / Sp series allows the threading of large stratified wires that are essential for obtaining high machining speeds and the resulting high productivity.

Pinterest
検索